Things you don't know about lag, and how to fix them.

[semiiee]

WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 184.0kb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 449.98kb/s

------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_07

------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.

Web100 reports the Round trip time = 197.74 msec; the Packet size = 1460 Bytes; and
There were 5 packets retransmitted, 51 duplicate acks received, and 63 SACK blocks received
The connection was idle 0 seconds (0%) of the time
C2S throughput test: Packet queuing detected: 3.63%
S2C throughput test: Packet queuing detected: 11.07%
This connection is receiver limited 12.03% of the time.
Increasing the the client's receive buffer (17.0 KB) will improve performance
This connection is network limited 87.88% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF

Server 'nitro.ucsc.edu' is not behind a firewall. [Connection to the ephemeral port was successful]
Client is probably behind a firewall. [Connection to the ephemeral port failed]
Packet size is preserved End-to-End
Server IP addresses are preserved End-to-End





iz bad?

[skyblade15]

where is the start button on the webpage ?

[angel_115]

WEB100 Enabled Statistics:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 103.0kb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 908.63kb/s

------ Client System Details ------
OS data: Name = Windows XP, Architecture = x86, Version = 5.1
Java data: Vendor = Sun Microsystems Inc., Version = 1.6.0_07

------ Web100 Detailed Analysis ------
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
No network congestion discovered.
Good network cable(s) found
Normal duplex operation found.

Web100 reports the Round trip time = 489.64 msec; the Packet size = 1460 Bytes; and
No packet loss - but packets arrived out-of-order 17.61% of the time
C2S throughput test: Packet queuing detected: 6.25%
S2C throughput test: Packet queuing detected: 7.28%
This connection is receiver limited 78.69% of the time.
Increasing the the client's receive buffer (62.0 KB) will improve performance
This connection is network limited 21.15% of the time.

Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: OFF
RFC 1323 Window Scaling: OFF

Server 'nitro.ucsc.edu' is not behind a firewall. [Connection to the ephemeral port was successful]
Client is not behind a firewall. [Connection to the ephemeral port was successful]
Packet size is preserved End-to-End
Server IP addresses are preserved End-to-End
Client IP addresses are preserved End-to-End

[BeyondStrike]

Connected to: nitro.ucsc.edu -- Using IPv4 address
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
checking for firewalls . . . . . . . . . . . . . . . . . . . Done
running 10s outbound test (client-to-server [C2S]) . . . . . 117.0kb/s
running 10s inbound test (server-to-client [S2C]) . . . . . . 772.23kb/s
Your PC is connected to a Cable/DSL modem
Information: Other network traffic is congesting the link